구매 링크 : http://www.rerc.co.kr/shop/goods/goods_view.php?goodsno=35

제품명 : 1/10 퀘넘 반달 4륜 전동 레이싱 버기 (ARR)
영문명 : 1/10 Quanum Vandal 4WD Electric Racing Buggy (ARR)
모델명 : 9382000168-0 

Hitting the dirt track has never been easier with the all new 1/10 Quanum Vandal 4WD Electric Racing Buggy Almost Ready to Run! It comes pre-assembled with electronics installed already. You will simply need to add your own 2CH transmitter/receiver and lipoly battery.

The Vandal chassis is lightweight yet rigid, offering a perfect combination of weight savings and strength. Additionally, it features a robust shaft driven 4WD system providing plenty of torque to both the front and rear wheels. An adjustable slipper clutch protects the drivetrain and metal gear front/rear differentials. No belt drive system requiring messy routine maintenance with this setup! 

This almost ready to run includes proper 1/10 buggy wheels, soft compound tires for increased traction and handling, as well as a wickedly styled, pre-painted body shell. Also, with features such as fully adjustable suspension, oil filled shocks and adjustable camber/castor, it's easy to fine tune the ride to the conditions of your favorite track or bashing spot. 

Features:

• Almost Ready to Run - Just install your own radio system and battery
• Adjustable camber, caster and shock mounting positions
• Low center of gravity chassis design
• Shaft driven 4WD system
• Adjustable slipper clutch
• Metal gear front/rear differential
• Oil filled shocks
• Soft compound tires for increased traction
• Pre-painted and trimmed body shell w/decal sheet included
• Pre-installed motor, ESC, and steering servo

Specs:

Length: 415mm
Width: 255mm
Height: 142mm
Wheelbase: 275/280mm
Gear Ratio: 11.2:1
Hex Hub Size: 12mm
Battery Tray Dimensions: 142x46x24mm (MAX battery size)
Motor: 3650 12.5T 3000kV TrackStar
ESC: 45A Trackstar Brushless ESC with HXT 4mm Connector

Required:

2CH transmitter and receiver
2S 3000~4000MAH lipoly battery








Posted by 리알씨 freedaemon

댓글을 달아 주세요

구매 링크 : http://rerc.co.kr/shop/goods/goods_view.php?goodsno=41

제품명 : HXT 리포 배터리 모니터 4셀용.
영문명 : HXT LiPoly Battery Monitor for 4S Packs.
모델명 : HXTBM4S 

HXT Battery Monitor for 4S LiPoly, a must have for all lipo users!

This device plugs into the balance port on your battery.

Should any one of your cells fall below 3.3v the light will change from Green to Red, indicating an unbalanced pack and that your battery should not be discharged further.

Discharging your pack to its normal level when you have an unbalanced pack will cause one cells capacity/voltage to drop too low, resulting in a faulty cell which will very quickly reduce the packs performance.

A properly balanced pack can last 600 cycles or more. However, unbalanced packs rarely make it past 100 cycles before at least 1 cell becomes faulty.

We strongly urge all customers to balance and discharge packs properly.

With this device, you will know immediately when your pack is unbalanced and should not be discharged further or balanced.



Posted by 리알씨 freedaemon

댓글을 달아 주세요


제품명 : 하비킹 리포 USB 충전 어뎁터 겸 셀체커 (2~6셀).
영문명 : HobbyKing™ LIPO to USB Charging Adapter and Cell Checker (2S~6S)
모델명 : 9070000027

This handy little device allows you to charge your mobile phone, USB keychain camera or any other 5V USB device at the field with a 2~6S Lipoly battery. It uses the balance plug (JST-XH) from your Lipoly battery for power. This device also doubles as a cell voltage checker thanks to the on-board LCD display. Low-voltage input protection will shut this device down should the input source voltage drop below 3V. This prevents critical over-discharging of your input battery. 

Features:
• Compact size
• 2~6S Lipoly input
• 5V/1000mAh USB output
• Convenient field charging of your mobile device

Specs:
USB Output: 5V/1000mAh
Input Voltage: DC 7.5~25.2V
Cell Checking: 1~6S Lipoly
Input Cut-Off Voltage: 3V per cell





Posted by 리알씨 freedaemon

댓글을 달아 주세요

구매 링크 : http://rerc.co.kr/shop/goods/goods_view.php?goodsno=32

제품명 : JST-XH 병렬 밸런스 리드 2셀용 250mm (6xJST-XH)

영문명 : JST-XH Parallel Balance Lead 2S 250mm (6xJST-XH)

모델명 : 015000044 





Posted by 리알씨 freedaemon

댓글을 달아 주세요


제품명 : 숫놈 JST-XH <-> 암놈 KoKam 4셀 10cm (5개/봉지)
영문명 : Male JST-XH <-> Female Kokam 4S 10cm (5pcs/bag) 
모델명 : 101a-104b-4s 

Listing is for 5 leads.
The JST-XH plug is used on Flightmax, Rhino, TURNIGY and many other brands of lipo packs.

Posted by 리알씨 freedaemon

댓글을 달아 주세요

구매 링크 : http://rerc.co.kr/shop/goods/goods_view.php?goodsno=30

제품명 : 하비킹 1/18 4륜 레이싱 버기 (RTR)
영문명 : 1/18 Scale 4WD RTR Racing Buggy
모델명 : 241000002

The 1/18 Scale 4WD RTR Racing Buggy makes off road racing easy to get into for anyone. With great features such as a 4WD transmission, oil-filled shocks and fully adjustable suspension, this buggy is ready for the track!

This buggy is completely ready to run with the included 2.4gHz radio system pre-installed, motor/esc and 1100mah NIMH battery pack w/charger. All that is needed is to charge the battery and your ready to hit the dirt!

Features:
-Full time 4WD system
-Oil filled shocks
-Fully adjustable independent suspension
-2.4gHz radio system
-Battery/charger included

Specs:
Length: 282mm
Width: 175mm
Wheelbase: 155mm
Ground clearance: 16mm
Weight: 521g
Gear ratio: 1:8.8
Motor: 370 brushed

Includes:
1/18 4WD RTR Racing Buggy
2.4gHz radio system
1100mAh NIMH battery pack
230V wall charger (two prong EURO style plug)

Required:
4 x AA batteries for transmitter










Posted by 리알씨 freedaemon

댓글을 달아 주세요

구매 링크 : http://rerc.co.kr/shop/goods/goods_view.php?goodsno=29

제품명 : 나일론 T커넥터 10쌍 (20pcs)
영문명 : Nylon T-Connectors 10 Pairs (20pc)
모델명 : 606A-606B 

Nylon T-connectors.

Pack includes 10 male and 10 female connectors.

ALERT!
These connectors are made from Nylon, making them very tough and difficult to melt, even with the worst of soldering skills.
These are for those customers still stuck with the old t-connector.
We suggest all customers to upgrade to the new XT-60 connector where possible as that is the connector attached to nearly all our batteries, esc, charger and models. 

Posted by 리알씨 freedaemon

댓글을 달아 주세요

구매 링크 : http://rerc.co.kr/shop/goods/goods_view.php?goodsno=28

제품명 : 하비킹 병렬 충전보드 6팩용 2~6셀 (HXT 4mm)
영문명 : Hobbyking Parallel charging Board for 6 packs 2~6S (HXT4mm)
모델명 : 9171000182 

Our very own in-house designed and built parallel charge board!

Now you can charge SIX (2~6S) lipo packs with same capacity & cell count simultaneously with this parallel charging board.
That means you can charge 6 3S 2200mAh or more at the same time with a standard charger!

Spec.
Cell: 2~6S
Voltage: 0~22.2VDC
Max current: 30A
Battery: 6 packs (same capacity & cell count)
Connector: HXT4mm/jst-xh

Note: The batteries should have same capacity.

Posted by 리알씨 freedaemon

댓글을 달아 주세요

구매 링크 : http://rerc.co.kr/shop/goods/goods_view.php?goodsno=26

제품명 : 바셔 니트로 서커스 1/16 미니 몬스터 트럭 (RTR)
영문명 : Basher Nitro Circus 1/16 Mini Monster Truck (RTR)
모델명 : 9249000913-0

The Basher family has grown bigger but with something smaller. Introducing the officially licenced Nitro Circus 1/16th Mini Monster Truck! This 1/16th Truck is a scaled down version of its big daddy (1/8th) but keeps many of the great features!

The Basher 1/16th Mini MT features a 2 x 2S LiPo capable brushless power system, and puts all that power down through a solid 4WD drivetrain. With 4 big bore oil filled shocks and heavy duty components, this truck can keep up with the big boys!

In addition, this truck has a special wheelie bar at the rear end with an aluminum shock absorber installed. Perfect for long distance wheelies and avoiding the embarrassing walk of shame out into the middle of your local bashing spot or track to flip your truck back upright.

The attention to detail on this truck is extraordinary. The engineers and designers at Basher underwent an extensive testing and development process to ensure no shortcuts were taken. Team Basher understand the importance of after sales support and offer a full range of spares for your battle scarred truck along with an awesome range of hop-up parts to upgrade your ride.

The Nitro Circus crew drove it like they stole it and in the end were excited about putting their hard earned name on it. Who knows, maybe it will have a cameo in their next movie or live show?

Features:
• Officially licensed by Nitro Circus
• Powerful 2800KV brushless inrunner motor (water resistant)
• 35A brushless ESC w/ reverse (water resistant)
• Metal gear high-torque steering servo (water resistant)
• Full time 4WD
• Sealed front and rear differentials
• Alloy motor mount plate
• Heavy duty drive shafts
• Hardened metal drive cups
• Full ball bearings
• Adjustable screw shock absorbers
• Oil filled, big bore shock absorbers
• Adjustable toe-in and toe-out
• Adjustable camber and castor
• Independent wishbone suspension
• Front and rear metal suspension arm holder
• Pre-installed wheelie bar
• Extra alloy shock for wheelie support
• 2 LED lights on the roll cage

Specs:
Length: 325mm
Width: 234mm
Height: 185mm (including lights)
Wheel base: 188mm
Ground clearance: 52mm (adjustable)
Battery area: 100mm x 18mm x 35mm
Motor size: 2838 Brushless Inrunner
Motor: 2800KV
Drive Train: Full Time 4WD, twin differential

Included:
1/16th scale Basher Nitro Circus mini monster truck
2.4ghz digital radio system
Body Decal Set
Instruction manual
Roll cage LED light set 

Required:
Charger for LiPoly battery
4 x AAA batteries (for transmitter)
2 x 2S 1300mah LiPoly packs in series















Posted by 리알씨 freedaemon

댓글을 달아 주세요

바셔 니트로 서커스 1/8 4WD 몬스터 트럭 (RTR)

구매 링크 : http://rerc.co.kr/shop/goods/goods_view.php?goodsno=27

New from Basher, the officially licenced Nitro Circus RC Monster Truck! Inspired by the only monster truck to ever do a backflip! This 1/8th scale grin inducing RC tuck is built to handle everything you throw at it! Don’t think outside the box, SMASH through it while popping a wheelie and launching off a ramp!

The Basher Nitro Circus MT Features a monster 4 cell capable brushless power system ready for your batteries and puts all that power down through an all steel 4WD drive transmission. With big bore alloy shocks and heavy duty components, this truck can launch off almost anything and just keep on truck’n!

The attention to detail on this truck is extraordinary. The engineers and designers at Basher underwent an extensive testing and development process to ensure no shortcuts were taken. Team Basher understand the importance of after sales support and offer a full range of spares for your battle scared truck along with an awesome range of hop-up parts to upgrade your ride.

The Nitro Circus crew drove it like they stole it and in the end were excited about putting their hard earned name on it. Who knows, maybe it will have a cameo in their next movie or live show?

Features:
• Officially licensed by Nitro Circus
• Powerful 2075KV Brushless Inrunner Motor (waterproof)
• 100A Brushless ESC w/ Reverse (waterproof)
• 18Kg Heavy Duty Steering Servo (waterproof)
• Full time 4WD 
• Steel front, center and rear sealed differentials 
• Hardened steel pinion gear 
• Heavy duty drive shafts 
• Hardened metal drive cups 
• Full ball bearings
• 3.5mm alloy chassis plate 
• Adjustable screw shock absorbers 
• Oil filled, big bore shock absorbers 
• 3.5mm shock shaft 
• Adjustable toe-in and toe-out 
• Adjustable camber and castor 
• Independent wishbone suspension
• Shock tower support brace

Specs:
Length: 577mm 
Width: 480mm 
Height: 314mm (To top of cab) 
Ground clearance: 110mm (Adjustable) 
Battery area: 138mm x 46mm x 25mm

Included:
1/8 scale Nitro Circus Basher monster truck
2.4ghz digital radio system
Parallel battery adapter cable
Wheel wrench
Instruction Manual

Required:
Charger for Li-poly battery
4 x AA batteries
2 x 2S 5000mah packs in series
OR
2x large capacity 4S packs in parallel for increased run time (battery adapter required) 



PRODUCT ID: 9249000911-0 
















Posted by 리알씨 freedaemon

댓글을 달아 주세요